Install the trunk lid handle

• Fit the trunk lid handle (1) as shown and clip it in at the detents (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (3).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Trunk lid handle
  screw	2Nm

• Connect connectors (1) and (2) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE TAILGATE TRIM PANEL .
• Refer to INSTALLING BOTH TRIM PIECES FOR THE REAR WINDOW FRAME .
• Refer to INSTALLING THE TRIM FOR THE TOP REAR WINDOW FRAME .
• Refer to INSTALLING THE SWITCH FOR THE AUTOMATIC TAILGATE OPERATION .
• Refer to INSTALLING THE REAR EMBLEM .