41 35 081 Removing and installing/replacing front left side panel

Read contents of BODY, GENERAL .

Observe GAP DIMENSIONS .

Necessary preliminary tasks: 

• Remove TRIM FROM WHEEL ARCH at front left
• Remove the TRIM PANEL for the left side sill
• Remove SIDE REPEATER
• Remove COWL PANEL COVER
• Partially release WHEEL ARCH COVER

Removal: 

Release clips and remove cover (1).

Fig 1: Locating Cowl Panel Cover Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen screws and remove side wall.

Fig 2: Side Wall And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Install side panel and tighten down screws.

Tightening torque 41 35 1AZ and 63 12 2AZ .

Fig 3: Side Wall And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Joint cover (1) and secure with clips.

Fig 4: Locating Cowl Panel Cover Clips

Courtesy of BMW OF NORTH AMERICA, INC.