51 71 040 Removing and installing/replacing front left or right wheel arch cover

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

NOTE: For purposes of clarity, shown with removed front axle.

Removal:

Release screws (1 and 2).

Unscrew nut (3).

Fig 1: Wheel Arch Cover, Clip, Nut And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen the clip (4) and remove the wheel arch cover (5).

Installation:

Feed in wheel arch cover (5).

Tighten down screws (1 and 2).

Tighten nut (3).

Fasten clip (4).

Fig 2: Wheel Arch Cover, Clip, Nut And Screws

Courtesy of BMW OF NORTH AMERICA, INC.