51 13 102 Removing and installing/replacing trim on front left or right wheel arch

Necessary preliminary tasks: 

• Release TRIM PANEL  for entrance in the front area.

Removal: 

Release trim (1) on clips (2) and latch mechanisms in the area (3).

If necessary, disconnect associated plug connection and remove cover (1).

Fig 1: Trim, Clips And Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.

If replacing with USA national version: 

Remount SIDE MARKER LIGHT .

Installation: 

Connect plug connections.

Clip in trim (1) on clips (2) and latch mechanisms (3).

Fig 2: Trim, Clips And Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.