51 24 130 Removing and installing/replacing striker for tailgate lock

WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Remove TRIM ON TAIL PANEL

REMOVAL:

Release bolts (1) and remove striker (2).

Fig 1: Striker Slacken Screws Location

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION:

Position striker (2) and tighten screws (1).

Tightening torque 51 24 2AZ .

Fig 2: Striker Slacken Screws Location

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking:

Install COVER ON TAIL PANEL
Adjust REAR LID LOCK