51 46 050 Removing and installing/replacing top cover on tail panel

WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Remove LUGGAGE COMPARTMENT FLOOR COVERING

REMOVAL:

Release expanding rivet (1).

Feed out cover (2) inwards/towards the top and remove.

If necessary, slightly release edge protection (3).

Fig 1: Removing Expanding Rivet

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION:

Feed in cover (2).

Make sure edge protection (3) is correctly seated.

Install expanding rivet (1).

Replace faulty expander rivets.

Fig 2: Removing Expanding Rivet

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking:

Install LUGGAGE COMPARTMENT FLOOR COVERING