51 13 102 Removing and installing/replacing trim on front left or right wheel arch

WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Release TRIM PANEL FOR ENTRANCE in the front area.

Removal:

Release trim (1) on clips (2) and detents in the area (3).

If necessary, disconnect associated plug connection and remove cover (1).

Fig 1: Releasing Trim Onto Clips

Courtesy of BMW OF NORTH AMERICA, INC.

If replacing with USA national version:

Remount SIDE MARKER LIGHT .

Installation:

Connect plug connections.

Clip in trim (1) on clips (2) and detents (3).

Fig 2: Releasing Trim Onto Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking:

Install TRIM PANEL FOR COVER ON SIDE MEMBER