51 11 780 Replace the front deformation element on the bottom left

WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Remove FRONT BOTTOM SUPPORT FOR BUMPER COVER

REMOVAL:

Only MINI Cooper S:

Release expanding rivet (1).

Remove screw (2).

Feed out air duct (3) from guide (4) and remove.

Fig 1: Removing Air Duct From Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1 to 3).

Remove deformation element (4).

Fig 2: Removing Deformation Element With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION:

Insert deformation element (4).

Tighten screws (1 to 3).

Screw	Tightening torque
(1)	51 11 9AZ
(2)	51 11 4AZ
(3)	51 11 5AZ

Fig 3: Removing Deformation Element With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Only MINI Cooper S:

Feed in air duct (3) with guide (4) into holder.

Secure air duct (3) with screw (2) and expanding rivet (1).

Fig 4: Removing Air Duct From Guide

Courtesy of BMW OF NORTH AMERICA, INC.