Front bumper
WARNING: This page is about a different car, the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATIONS - FRONT BUMPER
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bumper cover to front panel | F54/F55/F56/F57 | M6 | 6 Nm | |
| 2AZ Support, front top, to deformation element, front top | F54/F55/F56/F57/F60 | M8 | Nut | 28 Nm |
| 3AZ Support, front bottom, to deformation element, front bottom | F54/F55/F56/F57/F60 | M6x30 | screw | 8 Nm |
| 4AZ Vertical connection to deformation element | F54/F55/F56/F57/F60 | M6x20 | 11.8 Nm | |
| 5AZ Deformation element, bottom to adapter, front axle support | F54/F55/F56/F57/F60 | 11.8 Nm | ||
| 6AZ Deformation element, top, to engine carrier | F54/F55/F56/F57/F60 | Renew screw Joining torque Angle of rotation | 100 Nm 180° | |
| 7AZ Adapter, front axle support to front axle support | F54/F55/F56/F57/F60 | 100 Nm | ||
| 8AZ V-support to support on cross connection | F54/F55/F56/F57/F60 | 11.8 Nm | ||
| F60 | 25 Nm | |||
| 9AZ Air duct to deformation element top/bottom | F55/F56 | 4.6 Nm | ||
| F54/F57 | 8 Nm | |||
| F60 | 6 Nm | |||
| 10AZ Air duct to cross connection | F60 | 6 Nm |