51 33 000 Remove and install (replace) the power window regulator in the left or right front door

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove FRONT DOOR WINDOW GLASS

Removal:

Unfasten plug connection (1) and disconnect.

Loosen the cable from the holder (2).

Loosen the nuts (3) and remove the power window (4) from the door.

Fig 1: Power Window, Plug Connection, Holder And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Remount FLAT MOTOR .

Installation:

Insert the power window (4) into the door.

Tighten down nuts (3).

Tightening torque 51 33 1AZ .

Attach the cable to the holder (2).

Connect plug connection (1).

Fig 2: Power Window, Plug Connection, Holder And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.