51 13 402 Removing and installing/replacing the tailgate handle strip

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TAILGATE TRIM PANEL

Removal:

Release screws (1).

Fig 1: Locating Screws

G11649070

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off the tailgate handle strip (1) from the tailgate, unlock and disconnect the associated plug connections.

Remove the tailgate handle strip (1).

Fig 2: Removing Tailgate Handle Strip

G11649071

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replacement:

If necessary, remount the REAR VIEW CAMERA

Position the tailgate handle strip.

Connect plug connections.

Tighten down screws (1).

Fig 3: Locating Screws

G11649070

Courtesy of BMW OF NORTH AMERICA, INC.