Replacing the center spoiler on rear bumper panel (Cooper Convertible)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2021 MINI Cooper, 2020 MINI Cooper, 2019 MINI Cooper, 2018 MINI Cooper, and 2017 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work needed:

Remove rear BUMPER COVER .

Removal:

Release catches (1) and remove spoiler (2).

Courtesy of BMW OF NORTH AMERICA, INC.

When replacing, swap over the following parts:

Replace rear FOG LIGHT .
Version with PDC:
Replace rear middle ULTRASONIC TRANSDUCER and rear left ULTRASONIC SENSOR .

Installation:

Position spoiler (2) and engage detents (1).

NOTE: Detents (1) on spoiler and bumper cover must not be damaged.

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking:

Install rear BUMPER COVER .