REP-TAT-P-5218-01 Removing the seat frame

Preliminary work 

• Remove front STRAP FITTING 
• Remove FRONT SEAT 
• Remove INNER COVER 
• Remove the COVER  for backrest adjustment
• Remove the STEERING LEVER  for backrest adjustment
• Remove the LEVER  for seat height adjustment
• Remove the OUTER COVER  on the front seat
• Remove the THIGH SUPPORT  on the front seat
• Remove the SEAT COVER WITH CUSHION 

• Shift the rear seat backrest (5)  into an upright position.
  NOTE: Perform the steps on the right and left side.
• Loosen screws (4)  .
• Completely remove the rear seat backrest (5)  to the top.

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, feed out the relative cable and set aside rear seat backrest.