51 11 761 Remove and install/replace deformation element for front right bumper

Necessary preliminary tasks: 

• Remove SUPPORT FOR TOP FRONT BUMPER PANEL 
• Release FLUID FUEL TANK FOR WINDSCREEN WASHER SYSTEM

Removal: 

Remove screws (1 to 4).

Pull out deformation element (5).

Fig 1: Deformation Element And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Insert deformation element (5).

Tighten screws (1 to 4).

Fig 2: Deformation Element And Screws

Courtesy of BMW OF NORTH AMERICA, INC.