63 99 295 Replacing bulb for left or right side repeater

WARNING: Follow the SAFETY INSTRUCTIONS for handling bulbs/light sources (exterior lights).

Necessary preliminary tasks:

Removal:

Twist bulb holder (1) counter clockwise and remove from side repeater (2).

Pull bulb for side repeater (3) out of bulb holder (1).

Fig 1: Side Repeater And Bulb Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: Note BULB TYPE .

Insert bulb for side repeater (3) into bulb holder (1).

Join bulb holder (1) in side repeater (2) and twist clockwise up to limit position.

NOTE: Ensure latch mechanism of bulb holder (1) is correct in side repeater (2).

Fig 2: Side Repeater And Bulb Holder

Courtesy of BMW OF NORTH AMERICA, INC.