63 99... Safety instructions for handling bulbs/light sources (exterior lighting)

Do not look directly and for long periods of time into the light.

Do not look directly and unprotected into the light.

Disconnect all components from voltage supply before removal.

Work on the entire xenon lighting system (igniter, control unit and xenon bulb) may only be carried out by qualified personnel.

To avoid injury, wear protective goggles and gloves.

Disconnect bulbs/light sources from the voltage supply before changing them (lighting system and ignition off).

Do not touch glass plungers with bare hands, as even the smallest amount of contamination will causing etching and reduce bulb service life.

Only touch light bulbs with clean gloves or a clean cloth.

Do not expose light bulbs to mechanical vibrations.

Use only recommended light bulbs.

Follow the light bulb manufacturer's notes without fail.