51 45 106 Removing and installing (replacing) function support on instrument panel trim

Necessary preliminary tasks:

Removal:

Release screws (1).

Release function support (2) from clamps (3).

Unlock associated plug connections and disconnect.

Remove function support (2).

Fig 1: Function Support, Clamps And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Release and remount the trim (1, 2) from the clamps (3).

Fig 2: Trim And Clamps

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Connect associated plug connections.

Engage function support (2) in clamps (3).

Tighten down screws (1).

Fig 3: Function Support, Clamps And Screws

Courtesy of BMW OF NORTH AMERICA, INC.