51 12 050 Removing and installing/replacing support for rear bumper panel
WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove BUMPER PANEL
If necessary, detach cable for ultrasonic sensor from support (2).
Release nuts (1) on left/right and remove support (2).
Tightening torque 51 12 1AZ .