63 21 180 Removing and installing/replacing left or right rear light

Necessary preliminary tasks:

Release screws (1). Tightening torque 63 21 2AZ .

Fig 1: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove cover (1) in direction of arrow.

Fig 2: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Sectional view for purposes of clarity.

Unlock retaining tabs (1) from inside.

Remove the rear light to the outside and disconnect the plug connection.

Replacement :

If necessary, remove BULBS .

Fig 3: Unlocking Rear Light Retaining Tabs

Courtesy of BMW OF NORTH AMERICA, INC.