51 16 206 Removing and installing/replacing center armrest

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Version with telephone:

Version with telephone:

Disconnect plug connection (1).

Release cable holder (2) and feed out cable (3).

Fig 1: Identifying Cable, Cable Holder And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Version without telephone:

Release side screws on covers (1).

Unclip covers (1) in direction of arrow from each other and remove.

Release screw (2).

Unclip drinks holder (3) in upward direction and remove.

Fig 2: Removing Trims

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) at sides.

Release screws (2) and lift out center armrest (3).

Tightening torque 51 16 5AZ .

Fig 3: Identifying Armrest With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Fig 4: Identifying Storage Tray, Screw And Cover

Courtesy of BMW OF NORTH AMERICA, INC.