66 53 170 Removing and installing/replacing control unit for Top-/Rear-/Side-View Camera

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks:

Remove LEFT LUGGAGE COMPARTMENT WHEEL ARCH PANEL

Release screw (1).

Remove amplifier (2) in direction of arrow.

Fig 1: Removing Amplifier

G09928967

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (2) and screws (3).

Remove TRSVC control unit (1) including holder.

Fig 2: Identifying TRSVC Control Unit, Nuts And Screws

G09928968

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and disconnect.

Replacement:

Unfasten screws (2).

Remove TRSVC control unit (3) from bracket.

Fig 3: Identifying TRSVC Control Unit, Plug Connections And Screws

G09928969

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out PROGRAMMING/ENCODING .
CALIBRATE REVERSING CAMERA