LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3785 (Body Equipment - Repair - F12) >> Gaskets/Seals, Loose Body Components >> 51 71 447 Removing and installing or replacing trim panel for cover on left or right side member

51 71 447 Removing and installing or replacing trim panel for cover on left or right side member

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Release expanding rivet (1) and (3).

Release bottom screws (4).

Tightening torque 51 71 4AZ .

Unclip trim panel for cover on side member (2) in marked areas and remove.

Fig 1: Locating Expanding Rivet
G10046610Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Ensure that cover is correctly seated on side member (2) in marked areas.

Installation note: 

Retaining lugs (2) of holding strip at front (1) and rear (3) must be neither damaged nor missing.

Fig 2: Identifying Retaining Lugs
G10046611Courtesy of BMW OF NORTH AMERICA, INC.