Section 3769 (Double Clutch Gearbox - Repair - F12)
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
- Double Clutch Gearbox (DKG)
- 28 00... Checking/topping up oil level in twin-clutch gearbox (GS7D36SG)
- 28 00 101 Installing replacement transmission (GS7D36SG)
- 28 50 001 Manual emergency release of transmission lock (GS7D36SG) S63
- 28 00 020 Removing and installing or replacing transmission oil sump (GS7D36SG)
- 28 10 050 Removing and installing parking lock module
- 28 00 001 Removing and installing twin-clutch gearbox (GS7D36SG) S63
- 28 00 060 Replacing output flange shaft seal (GS7D36SG)
- 28 10 550 Replacing parking lock module
- 28 60 000 Replacing pressure filter (GS7D36SG)
- 28 10 000 Replacing suction filter (GS7D36SG)
- Housing With Add-On Parts
- Double Clutch
- Control Unit, Mechatronics, Hydraulics
- 28 60... Notes on mechatronics (GS7D36SG)
- 28 60 010 Removing and installing mechatronics (GS7D36SG)
- 28 60 030 Removing and installing/replacing the hydraulic cap (GS7D36SG)
- 28 60 025 Replacing O-ring for wiring harness (GS7D36SG)
- 28 60 514 Replacing mechatronics (GS7D36SG)
- 28 60 000 Replacing pressure filter (GS7D36SG)
- 28 60 020 Replacing wiring harness (GS7D36SG)