00 00 624 Service - vehicle check
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
- Service - vehicle check
Passenger compartment:
- Check HORN, HEADLIGHT FLASHERS AND HAZARD WARNING FLASHERS
- Check INSTRUMENT AND INSCRIPTION LIGHTING, PASSENGER COMPARTMENT AND GLOVEBOX LIGHTING, BLOWER
- Check LIGHTING SYSTEM : if necessary, charge separately to adjust the headlights, function of front/rear and vehicle number plate lighting
- SEAT BELTS : Condition of seat belt strap, check function of automatic reel, check seat belt locking reel, seat belt buckle, seat belt clip and, if necessary, seat belt clasp for damage
- Check WINDSCREEN WIPER AND WASHER SYSTEM FOR FUNCTION AND SETTING
- Convertible only:
Activate the rollover protection system manually. Note: Open the soft top prior to the triggering process!
Rear/body/tires:
- BATTERY: Check display (magic eye), recharge if necessary (charged separately)
- Check TIRES (incl. compact spare wheel if present):
- Tread depth
- Tread wear pattern
- External condition
- Check inflation pressure and correct if necessary.
- If fitted:
BMW Mobility System: Check expiry date on sealant bottle. Replace sealant bottle if necessary (charge separately).
- Check that warning triangle, high-visibility jacket and first-aid kit are present. Check expiry date on first-aid kit (observe national legislation where applicable).
- Initialize RUN FLAT INDICATOR
Engine compartment:
- Check COOLANT LEVEL AND CONCENTRATION , top up if necessary. Inform customer in event of incorrect fluid level and, if necessary, troubleshoot (charged separately).
- WINDOW GLASS AND HEADLIGHT CLEANING SYSTEM : checking fluid level, topping up if necessary
- If fitted:
Steering fluid reservoir: Check oil level, top up if necessary. Inform customer in event of incorrect fluid level and, if necessary, troubleshoot (charged separately).
Underfloor:
- BRAKE LINES AND CONNECTIONS : Check for tightness, damage, mounting and correct position
- VEHICLE UNDERBODY including all visible components: Check for damage, correct position, tightness and corrosion
- STEERING COMPONENTS : Check for play, tightness is applicable, damage and wear
Test drive:
- CHECK FOR ROAD SAFETY :
- Brakes
- Steering
- Shock Absorbers
- Transmission
- Reset CBS DISPLAY according to factory specification