00 00... Tires: checking and if necessary correcting inflation pressure, checking condition, tread depth and pattern

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Check tire pressure (also spare/compact spare wheel if present):
- Check tire pressure in accordance with label on B-pillar
- The tire pressure in the spare wheel must be 0.5 bar higher than the maximum specified value on the label
Check tire condition:
- Check tread depth of all tires with tire tread gauge
- Check tire tread surfaces and side walls for incisions and foreign particles such as nails or screws
- Check tread wear pattern for localized flattening and wear on one side; if necessary, carry out wheel/chassis alignment after consulting with customer and issue a separate invoice for this work

NOTE:

For reasons of driving safety, only use tires of the same design and tire tread on a single vehicle
Inform customer of any incorrect or worn tires