00 00... Seat belts: Check condition of seat belt strap, check function of automatic reel, seat belt locking reel, seat belt buckle, seat belt clip and, if necessary, seat belt clasp

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Seat belt strap, automatic reel, seat belt locking reel

Pull out seat belt strap and make sure it emerges without jerking.

Seat belt strap:

folding
unraveling
pinches
cracks and tears
traces of melting
seat belt clip (retaining button) and, if necessary, seat belt clasp of belt tongue on seat belt strap

for damage and proper installation.

Retract seat belt strap; here the automatic reel must retract the seat belt strap automatically and without squeaking noises; the last section of the strap may have to be fed in.

Pull out seat belt strap in short tugs - seat belt locking reel must lock.

Seat belt buckle

The belt tongue on the seat belt strap must easily snap into place with an audible click.

When the "Press" button is pressed, the belt tongue must be ejected from the buckle under spring pressure.

NOTE: If the seat belt is damaged, you must replace the seat belt completely after consulting the customer; issue a separate invoice for this work.
Instructions on how to proceed, refer to CHECKING AUTOMATIC SEAT BELT .