66 53 020 Removing and installing (replacing) reversing camera: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION)
.
Necessary preliminary tasks:
- Remove CENTRE TAILGATE TRIM STRIP
Unlock latch mechanisms (2) and lever reversing camera holder (3) out of center tailgate trim strip (4).
Feed reversing camera (1) out of camera holder (3).
Replacement:
Remove protective film from lens of reversing camera (1).
Fig 1: Identifying Latch Mechanisms And Lever Reversing Camera Holder Out Of Centre Tailgate Trim Strip
After installation:
- Calibrate REVERSING CAMERA