51 13 220 Removing and installing / replacing middle trim strip on rear lid

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317

Necessary preliminary tasks:

Remove BOTH REAR LIGHTS

Release screws (1) on inside of rear lid.

Unlock and disconnect plug connection (2) - rear lid actuation button and plug connection (3) - reversing camera.

Fig 1: Identifying Rear Lid Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Graphic originates from F01

Carefully detach trim strip (1) from rear lid (2) with special tool 00 9 317 and remove

Installation:

If necessary, replace damaged plastic clips (3).

Fig 2: Disconnecting Trim Strip From Rear Lid Using Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.