2211110 Replacing left engine support arm (N51/N52/N52K/N53)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Remove underbody protection at front and rear
- Secure engine in INSTALLATION POSITION
- Remove INTAKE FILTER HOUSING
- Remove REINFORCEMENT STRUT (E90/91/92 only)
Release grounding strap from engine support arm.
Release clamp from fuel hose of engine support arm.
If necessary, release screw (1).
Release corrugated tube (2) from retainer.
Release screws (3).
Remove engine support arm.
Installation:
Aluminium screws/bolts must be replaced.
Tightening torque 22 11 3AZ