67 31 X01 Removing and refitting/replacing backrest width adjustment motor (from production date 07/2012 through model year 2015)

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove front seat. See REMOVING DRIVER'S SEAT or REMOVING FRONT PASSENGER SEAT .
Remove rear panel. See:
- REMOVING REAR PANEL (NORMAL/ELECTRIC SEAT)
- REMOVING REAR PANEL (COMFORT SEAT)
Remove SIDE AIRBAG if necessary

Detach seat fabric (1) in marked area.

Fig 1: Identifying Seat Fabric In Marked Area

G09927304

Courtesy of BMW OF NORTH AMERICA, INC.

Fold seat fabric (1) slightly forwards as shown.

Drill out expanding rivet (2).

Fig 2: Identifying Seat Fabric And Expanding Rivet

G09928018

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Remove backrest width adjustment motor (2).

Fig 3: Identifying Backrest Width Adjustment Motor

G09928019

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE:

Carry out FUNCTION CHECK WITH ADAPTER CABLE

Replacement:

INITIALIZE seat height adjustment drive unit.