51 47 244 Removing and installing/replacing all luggage compartment trims (with ski bag)

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove LUGGAGE COMPARTMENT WHEEL ARCH PANEL ON LEFT .
Remove RIGHT LUGGAGE COMPARTMENT WHEEL ARCH PANEL
Remove backrest. See REMOVING BACKREST FOR REAR SEAT (ELECTRIC) or REMOVING BACKREST REAR SEAT (NON-ELECTRIC) .

Release screws (1) on ski bag trim (2).

Fig 1: Identifying SKI Bag Trim And Screws

G06885910

Courtesy of BMW OF NORTH AMERICA, INC.

Not with cool box or high-voltage system

Lever out expanding rivets (1).

Remove skibag trim (2).

Remove cover for luggage compartment separating wall (3).

Fig 2: Removing Cover For Luggage Compartment Separating Wall

G06885911

Courtesy of BMW OF NORTH AMERICA, INC.

With cool box or high-voltage system

Lever out expanding rivets (1).

Remove skibag trim (2).

Remove cover for luggage compartment separating wall (3).

Fig 3: Identifying Rivets, Skibag Trim And Luggage Compartment Separating Wall

G06885912

Courtesy of BMW OF NORTH AMERICA, INC.