61 31 382 Replacing coolant level switch
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Risk of scalding!
Only perform this work after engine has cooled down.
Necessary preliminary work:
- Remove TRAILING LINK
- Remove INTAKE DUCT .
- Release OIL RESERVOIR
Release screws (1).
Lift out coolant expansion tank (2) with oil reservoir (3) in direction of arrow.
Disconnect plug connection (1).
Turn coolant level switch (2) in direction of arrow and pull downwards out of expansion tank (3).