51 71... Removing and installing/replacing (front) left or right suspension crossbrace
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Driving without the suspension cross-brace is not permitted. (risk of damage to the body).
Tighten screw on suspension cross-brace to torque. Then tighten to angle of rotation, special tool 009120 TORSION ANGLE GAUGE .
Release screws (1).
Tightening torque 51 61 2AZ
Remove suspension cross-brace (2).
Installation note:
Make sure suspension cross-brace (2) is in correct installation position. Screw with washer is fitted at connection, front top.