13..... Remove the intake port

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove SUSPENSION CROSS-BRACE .

Picture describes the left side, the procedure for the right side is identical.

Press in latch mechanism (1).

Feed out intake duct (2) towards top.

Fig 1: Pressing-In Latch Mechanism And Feeding-Out Intake Duct Toward Top

Courtesy of BMW OF NORTH AMERICA, INC.

Press in latch mechanism (1).

Detach intake port (2) towards rear and remove.

Fig 2: Detaching Intake Duct Toward Rear

Courtesy of BMW OF NORTH AMERICA, INC.