41 62 000 Rear Lid Removal And Installation (Convertible)
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Read contents of Body, general .
Necessary preliminary work:
- Remove trim panel for rear lid
Carry over the work step shown symmetrically to the other side of the vehicle.
Release bolts (1).
Tightening torque: 20 Nm
Remove rear lid.
Installation note:
- Install rear lid at screw locations on hinge.
This dispenses with the need for adjustment after installation.
If necessary, adjust rear lid .