41 62 014 Adjusting Rear Lid (Convertible)
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Read contents of Body, General .
NOTE:
Following components must be correctly fitted and adjusted:
The 41 00... BODY GAP DIMENSIONS serve as the basis for adjustment work.
Make unpainted surfaces visible by also moving the hinges.
Touch these up in the appropriate color.
Slacken screws (1) on rear lid hinge to rear lid until such stage that rear lid can still be moved.
Adjust rear lid vertically and lengthways.
Retighten all screws.
Tightening torque: 20 Nm.
NOTE:
If lateral adjustment is necessary, it is essential to adjust the convertible top compartment lid; carry out this adjustment if necessary.
Only then carry out lateral adjustment with spacer plates on rear lid hinge.
Adjust rear lid lock .
Adjust bump stops .