17 11 035 Removing and installing/replacing fan cowl with electric fan (N52/ N52K/ N53)

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Read out fault memory of DME control unit
Switch off ignition
Remove Intake Duct
Automatic only:
Remove front Underbody Protection

Automatic only:

Release bolt.

Detach cooler (1) for automatic transmission from fan cowl (2).

Fig 1: Cooler, Mounting Bolt And Fan Cowl

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug (1) and remove.

Unclip line (2) from fan cowl.

Detach cable strap (3) from fan cowl.

Release bolt.

Unlock catch in direction of arrow.

Remove fan cowl towards top.

Fig 2: Fan Cowl, Plug, Line, Retaining Bolt And Removal Direction

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Now clear the fault memory.