Section 1081 (Fuel Supply System - Repair - E90/E91)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2008 BMW 328xi, 2008 BMW 328i, 2008 BMW 323i, 2007 BMW 328xi, and 2007 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
- 00 Fuel pick-up, cleaning
- 16 00 General function description for fuel supply systems
- 16 00 ... Fuel supply system (petrol/gasoline)
- 16 00 005 Draining and filling fuel tank
- 16 00 100 Checking fuel tank and tank ventilation system for leaks
- 16 00 102 Checking fuel tank and tank venting system for leaks with tank leakage diagnosis module (DMTL)
- 16 00 510 Conducting leak test on fuel tank and tank venting system
- 11 Fuel tank with mounting
- 16 11 ... Removing and installing or replacing vent hose from carbon canister to dust filter
- 16 11 030 Removing and installing or replacing fuel tank (petrol/gasoline)
- 16 11 030 Removing and installing/replacing fuel tank (petrol/gasoline vehicles with US version DMTL)
- 16 11 048 Removing and installing or replacing fuel filter with pressure regulator (petrol/gasoline)
- 16 11 060 Removing and installing or replacing fuel filler pipe
- 16 11 071 Replacing rubber sleeve between fuel filler pipe and fuel tank
- 16 11 130 Checking filler cap pressure relief valve
- 12 Fuel transfer, sensor
- 16 11 048 Removing and installing or replacing fuel filter with pressure regulator (petrol/gasoline)
- 16 12 Replacing Outer Fuel Filter
- 16 12 ... Checking repumping function of suction-jet pump with BMW diagnosis system
- 16 12 000 Removing and installing or replacing fuel gauge sensor (petrol/gasoline, right)
- 16 12 001 Removing and installing or replacing fuel gauge sensor (petrol/gasoline, left)
- 16 12 010 Removing and installing or replacing carbon canister
- 16 12 010 Removing and installing/replacing carbon canister (DMTL)
- 13 Fuel ventilation
- 14 Fuel pump