16 11 071 Replacing rubber sleeve between fuel filler pipe and fuel tank
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2008 BMW 328xi, 2008 BMW 328i, 2008 BMW 323i, 2007 BMW 328xi, and 2007 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Before starting the engine for the first time:
- Check ground connection at fuel filler neck to body for continuity. If necessary, clean contact surface between body and fuel filler pipe screw connection.
- Fill fuel tank with min. 5 l fuel.
Necessary preliminary tasks:
Loosen hose clamps (1).
Detach rubber sleeve first from fuel filler pipe and then from fuel tank.
Installation:
For tightening torque refer to 16 11 3AZ in 16 11 FUEL TANK AND MOUNTING PARTS .