52 26 199 Removing and installing/replacing rear panel on left rear seat backrest
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2007 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove Backrest For Rear Seat
- remove Cover Strip or
Remove Ski Bag
Lever backrest cover all round out of backrest frame.
Detach rear panel (2) with flat scraper (1) from rear seat backrest.
Installation:
Comply with instructions issued by manufacturer of universal spray adhesive.
Apply universal spray adhesive to rear panel and rear seat backrest.
Fit and align rear panel within the air drying time (see manufacturer's instructions).
Observe and adhere to curing time to prevent rear panels from slipping.