52 26 020 Removing and installing/replacing both backrests for rear seat
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2008 BMW 335xi, 2008 BMW 335i, 2008 BMW 328xi, 2008 BMW 328i, and 2007 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove Armrest Side Section
- Remove Rear Seat
NOTE:
A 2nd person is required to help remove and install the backrest.
Left backrest:
- Release screw (1).
For tightening torque refer to 52 26 01AZ in 52 24 REAR SEAT (NORMAL), MANUAL .
- Lay belt (2) around centre armrest
- Fold backrest forwards slightly (3)
- Pull backrest forwards and outwards out of centre mount (4)
Right backrest:
- Release screw (1).
For tightening torque refer to 52 26 01AZ in 52 24 REAR SEAT (NORMAL), MANUAL .
- Fold backrest forwards slightly (2)
- Pull backrest forwards and outwards out of centre mount (3)