Remove/Install Lower Trim Strip On Window Frame Of Front Door - AR72.10-P-1713S

Model 223 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Lower the side window completely.	Model 223 except code Z07 (B7 armoring on special protection version)
2	Remove outside mirror.		AR88.70-P-9000SGA
		Model 223 with code Z07 (B7 armoring on special protection version)
		Model 223 except code Z07 (B7 armoring on special protection version)	AR88.70-P-9000S
3	Position tape under both ends of lower trim strip (1) and affix to door paneling.	Tape protects painting. Paint can otherwise be damaged during removal of lower trim strip (1).
4	Unclip lower trim strip (1).	Carefully lift lower trim strip (1) out of fold on door paneling. Otherwise, the lower trim strip (1) may bend and must be replaced. Model 223 with code Z07 (B7 armoring on special protection version) Despite all caution, the lower trim strip (1) can become bent during unclipping and should be replaced if this happens.
		Lubricant, rubber assembly 1 L	*BR00.45-Z-1010-06A
		Long wedge	Fig 1
5	Install in the reverse order.

Fig 1: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1010-06A	Lubricant, rubber assembly 1 L	A 000 989 03 67