LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2023 >> GLE450 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Air Intake, Turbocharging -- 167 Chassis (2 Of 2) >> Testing & Repair >> Drain/Fill Low Temperature Circuit Coolant - AR09.41-P-6834MRK

Drain/Fill Low Temperature Circuit Coolant - AR09.41-P-6834MRK

Engine 264 In Model 167 

MODIFICATION NOTES

25.04.2021 Cooling system   BF20.00-P-1001-06D
G15037150Courtesy of MERCEDES-BENZ USA
WARNING Risk of injury  to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning  from swallowing coolant. Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the overpressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses. AS20.00-Z-0001-01A
Notice  Notes on avoiding damage through contamination and foreign objects   AH00.00-P-5000-01A
Notice  Notes on coolant   AH20.00-P-2080-01KOA
  Notes on coolant level   AH20.00-P-1142-01CW
  Drain off     
1 Slowly unscrew cap (1) of coolant expansion reservoir (2) and release overpressure.    
2 Remove front and center bottom engine compartment linings.   AR61.20-P-1105ME
3 Remove coolant hose (3) from transmission oil heat exchanger (4) and collect escaping coolant in suitable container.   AR20.20-P-7441-01RQ
  Pour in     
4 Install coolant hose (3) on transmission oil heat exchanger (4).    
5 Add coolant and bleed low-temperature circuit.   AR20.00-P-1142-04OLC
    FLUID SPECIFICATION Cooling system *BF20.00-P-1001-06D 
    Test pressure for pressure-testing the engine cooling system *BE20.30-P-1005-01A 
    SPECIAL TOOL Test cap Fig 2
    SPECIAL TOOL Cooler vacuum filling device Fig 5
    SPECIAL TOOL NTKL Adaption Fig 1
    SPECIAL TOOL Electric vacuum pump Fig 4
    SPECIAL TOOL Pressure pump Fig 3
INSPECT Check     
6 Check low-temperature circuit for leak tightness.   AR20.00-P-1011MRK
7 Install lower engine compartment lining.   AR61.20-P-1105ME
RADIATOR OR EXPANSION RESERVOIR CAP

Number Designation 2-stage latch cover
BE20.30-P-1005-01A Test pressure for pressure-testing the engine cooling system Overpressure bar 1, 4
COOLING SYSTEM

Number Designation Engine 264 in model 167
BF20.00-P-1001-06D Cooling system Workshop replacement amount Main circuit Liter ≈13, 0
Low-temperature circuit Liter -
Antifreeze/water Down to -37°C % 50/50
-38°C and below % 55/45
Fluids Specifications BB00.40-P-0310-01A
Fluids Specifications BB00.40-P-0325-06A
Fluids Specifications BB00.40-P-0326-06A
Fig 1: Identifying NTKL Adaption (285 589 01 21 00)
G09975410Courtesy of MERCEDES-BENZ USA
Fig 2: Identifying Test Cap (210 589 00 91 00)
G13656752Courtesy of MERCEDES-BENZ USA
Fig 3: Identifying Pressure Pump (124 589 24 21 00)
G12817109Courtesy of MERCEDES-BENZ USA
Fig 4: Identifying Electric Vacuum Pump (285 589 02 21 00)
G13656747Courtesy of MERCEDES-BENZ USA
Fig 5: Identifying Cooler Vacuum Filling Device (285 589 00 21 00)
G12618419Courtesy of MERCEDES-BENZ USA