Remove/Install Dashboard - AR68.10-P-1000MFA
Model 118, 177, 243, 247
Shown on model 177.0
Shown on model 177.0
| Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical component parts to temperatures above 100°C or 212°F. Disconnect current supply when working on such component parts. | AS91.00-Z-0008-01A | |
| Notice | Notes on performing repair, body work and welding on vehicles with airbags and RTE units | AH91.00-P-0002-01M | |
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1 | Move front seats to rearmost position. | ||
| 2 | Adjust steering wheel to center position. | ||
| 3 | Move steering column tube (2) downward and forward. | ||
| 4 | Disconnect ground line from battery. | AR54.10-P-0003MFA | |
| 5 | Remove trim from the A-pillar. | AR68.30-P-4050MFA | |
| 6 | Remove steering column tube module control unit (N80). | AR54.25-P-2802MFA | |
| 7 | Remove head unit/instrument cluster display cluster (A40/16). | AR54.30-P-6023MFA | |
| 8 | Unclip covers (3) on left and right of instrument panel (1) and remove. | Fig 1 | |
| 9 | Remove exterior lighting switch group and electric parking brake (S1/2). | AR54.25-P-3270MFA | |
| 10 | Remove air conditioning control panel (N58/1). | AR83.30-P-6631MFA | |
| 11 | Remove glove box. | AR68.10-P-1400MFA | |
| 12.1 | Remove driver knee airbag squib (R12/25). | Model 118, 177, 243, 247 with code 294 (Knee airbag) |
AR91.60-P-0200MFA |
| 12.2 | Remove bottom trim for instrument panel (1) on the driver's side. | Model 118, 177, 243, 247 except code 294 (Knee airbag) |
AR68.10-P-1501MFA |
| 13 | Remove center console. | AR68.20-P-2000MFA | |
| 14 | Remove center air vent with trim element. | AR83.10-P-4509MFA | |
| 15 | Unclip and remove cover (4). | ||
| 16 | Unclip center instrument panel speaker (H4/27). | Model 118, 177, 243, 247 with code 810 (Premium sound system) Model 118, 177, 243, 247 with code 853 ("Midline" sound system) |
|
| 17 | Release and disconnect electrical connector from the center instrument panel speaker (H4/27) and remove center instrument panel speaker (H4/27). | Model 118, 177, 243, 247 with code 810 (Premium sound system) Model 118, 177, 243, 247 with code 853 ("Midline" sound system) |
|
| 18 | Remove screws (5). | ||
| 19 | Remove screw (7). | If the screw (7) is present. |
*BA91.60-P-1007-01Q |
| 20 | Release and disconnect electrical connector (10). | Model 118, 177, 243, 247 with code 877 (Ambient lighting) |
|
| 21 | Pull instrument panel (1) out so that the electrical connectors (11) are accessible. | ||
| 22 | Release and disconnect electrical connectors (11). | ||
| 23 | Release and disconnect electrical connectors (8) from front passenger airbag. | Fig 2 | |
| 24 | Remove instrument panel (1). | ||
| 25 | Remove detachable parts of the instrument panel (1). | When replacing instrument panel (1). | |
| 26 | Install in the reverse order. |
AIRBAG
| Number | Designation | Model 118 | Model 177 | |
|---|---|---|---|---|
| BA91.60-P-1007-01Q | Bolt, ground connection of front passenger airbag to crossmember below instrument panel | Nm | 3, 5 | 3, 5 |
AIRBAG
| Number | Designation | Model 243 | Model 247 | |
|---|---|---|---|---|
| BA91.60-P-1007-01Q | Bolt, ground connection of front passenger airbag to crossmember below instrument panel | Nm | 3, 5 | 3, 5 |