Read Out Map Data Status From COMAND Navigation System - AP82.85-S-8251E

Model 907 

with code E1E (Navigation) 

with code E3M (MBUX multimedia system with 7-inch touch screen) 

Model 907 

with code E4M (MBUX multimedia system with 10.25-inch touchscreen) 

Model 907 

with code EJ9 (COMAND Online) 

	Read out navigation system
1	Read out map version using COMAND.	Model 907 Read out map version in COMAND as follows: Switch on COMAND → Select "Navi" menu item → Select "Options" menu item→ Select "Extended" menu item → Select "Map version menu item.
	Check
2	Note the map version displayed on the service sheet or the reception report and compare with the map version currently available.	If the map data version is not up to date. ↓ Check whether the customer is entitled to a map update free of charge. Initial registration was max. 3 years ago. Only for certain markets (see Service Information bulletin).
		Service Information: Free map updates for COMAND If yes, ↓ update map data free of charge (For cost settlement see service information).	SI82.85-S-0019A
			AP82.85-S-8252E
		After obtaining special order. If no, ↓ clarify with the customer whether a chargeable map update should be performed.
			AP82.85-S-8252E
		After obtaining special order.