LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> Sprinter 1500 Van Passenger >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> ELECTRICAL SYSTEM, EQUIPMENT & INSTRUCTIONS - BASIC KNOWLEDGE (1 of 2) >> Basic Knowledge >> Caravan Control Unit Battery Management Control, Function - GF54.21-D-5015TSA

Caravan Control Unit Battery Management Control, Function - GF54.21-D-5015TSA

Model 907 

with code JA3 (Intelligent body control.) 

General 

The MBAC can control the battery management and a charger. The control is a basic function of the Mb Advanced Control control unit (N175).

Battery management control, function 

The MBAC can set the "SleepmodeStandbyTime" value for each battery management unit between 2 threshold values in seconds. To do so, the battery management unit must be connected to MBAC over the LIN interface.

The MBAC can set the "WakeupCurrent" value for each battery management unit between 2 threshold values in amps and with a specific accuracy. To do so, the battery management unit must be connected to MBAC over the LIN interface.

The MBAC can set the "WakeupChargeCurrent" value for each battery management unit between 2 threshold values in amps and with a specific accuracy. To do so, the battery management unit must be connected to MBAC over the LIN interface.

The MBAC can set the "WakeupCharge" value for each battery management unit between 2 state of charge threshold values and with a specific accuracy. To do so, the battery management unit must be connected to MBAC over the LIN interface.

Charger control, function 

The MBAC can set the "ChargingVoltage" value for each charger between 2 threshold values in volts and with a specific accuracy. To do so, the charger must be connected to MBAC over the LIN interface.

The MBAC can set the "BatteryVoltage" value for each charger between 2 threshold values in volts and with a specific accuracy. To do so, the charger must be connected to MBAC over the LIN interface.

The MBAC can set the "SilentMode" value (TRUE or FALSE) for each charger. To do so, the charger must be connected to MBAC over the LIN interface.

Caravan control unit battery management status, function GF54.21-D-5016TSA 
Signal list, caravan control unit, battery management, function GF54.21-D-5058TSA 
Signal list, caravan control unit, charger, function GF54.21-D-5062TSA 
Overview of system components of caravan control unit GF54.21-D-9992TSA