Remove/Install Seat Cushion Airbag - AR91.60-P-0698S

Model 223 

with code 223 (Electric backrest adjustment and head restraints) 

with code 453 (Rear reclining seat) 

Model 223 

with code 224 (Individual rear seats) 

with code 453 (Rear reclining seat) 

Fig 1: Seat Cushion Airbag Components Location - Model 223 With Code 223, 224, 453

Courtesy of MERCEDES-BENZ USA

	Risk of injury  during testing and repair operations related to pyrotechnical components	Do not expose pyrotechnical component parts to temperatures above 100°C or 212°F. Disconnect current supply when working on such component parts.	AS91.00-Z-0008-01A
Notice	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Information, assessment and legal requirements when working with, handling and storing pyrotechnical components		AH91.00-Z-0000-10A
	Remove/install
1	Remove seat cushion cover with padding.	Model 223 with code 223 (Electric backrest adjustment and head restraints) with code 224 (Individual rear seats) with code 453 (Rear reclining seat) Model 223 with code 223 (Electric backrest adjustment and head restraints) with code 453 (Rear reclining seat) except code 224 (Individual rear seats)	AR91.18-P-1851SA
2	Unclip line brackets (2) from seat cushion frame.	Dismantling tool	Fig 2
3	Remove nuts (3).	Nut, seat cushion airbag to seat cushion frame	*BA91.60-P-1006-01I
4	Expose the electrical wiring harness (4).
5	Unhook cushion airbag (1) from hook.
6	Remove cushion airbag (1).	: Check for correct installation position of ground line (5).
7	Install in the reverse order.
	Check
8	Check Supplemental Restraint System (SRS) using vehicle diagnosis system.
			AD00.00-P-2000-06FR

Fig 2: Identifying Dismantling Tool (000 589 95 63 00)

Courtesy of MERCEDES-BENZ USA