Remove/Install Head-Up Display - AR54.30-P-6400S
Model 223
with code 438 (Head-up display, Classic.)
Model 223
with code 445 (Head-up display with augmented reality.)
Shown with code 445 (Head-up display with augmented reality)
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Commission Head-up Display (A40/12). | When replacing Head-up Display (A40/12). | |
| AD00.00-P-2000-06FR | |||
| Fig 1 | |||
| 2 | Remove instrument panel. | AR68.10-P-1000S | |
| 3 | Cover head-up display (A40/12) with a clean cloth. | ||
| 4 | Remove bolts (1). | ||
| 5 | Remove air duct (3) from head-up display (A40/12). | Model 223 with code 445 (Head-up display with augmented reality.) |
|
| 6 | Release and disconnect electrical connectors (2). | ||
| 7 | Remove Head-up Display (A40/12) upwards. | ||
| 8 | Remove head-up display (A40/12) from vehicle. | Remove the head-up display (A40/12) carefully. Otherwise the windshield or head-up display (A40/12) may be damaged. |
|
| 9 | Install in the reverse order. | ||
| Check | |||
| 10 | Check and adjust Head-up Display (A40/12). | Model 223 with code 438 (Head-up display, Classic.) |
|
| AR54.30-P-6401S | |||
| AD00.00-P-2000-06FR | |||
| If head-up display (A40/12) is not displaying correctly, calibrate head-up display (A40/12) using diagnostic system. |
|||
| 11 | Check head-up display (A40/12) using diagnostic system. | Model 223 with code 445 (Head-up display with augmented reality.) |
|
| AD00.00-P-2000-06FR | |||
If head-up display (A40/12) is not displaying correctly, ↓ calibrate head-up display (A40/12) using diagnostic system. |
Fig 1 |