Remove/Install Dashboard - AR68.10-P-1000S
Model 223
Shown with code 494 (USA version)
Shown with code 878 (CONNECTED LIGHT ambient lighting)
Shown with code P53 (Air purification package)
Shown with code Z07 (B7 armoring for special protection version)
| Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical component parts to temperatures above 100°C or 212°F. Disconnect current supply when working on such component parts. | AS91.00-Z-0008-01A | |
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Notice | Notes on avoiding damage to optical fibers during repair work | AH82.60-P-0001-05AK | |
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1 | Remove head unit. | Model 223 with code 521 (Connect 20 Mid (NTG7)) Model 223 with code 534 (Connect 20 Premium (NTG7)) |
AR82.85-P-1101S |
| 2 | Remove trim element from instrument panel on driver side. | AR68.10-P-1186S | |
| 3 | Remove trim element from passenger-side instrument panel. | AR68.10-P-1187S | |
| 4 | Remove trim at bottom for instrument panel on driver's side. | AR68.10-P-1501S | |
| 5 | Remove instrument cluster control unit. | AR54.30-P-7101S | |
| 6 | Remove trim from the left and right A-pillar. | AR68.30-P-4050S | |
| 7 | Remove steering column tube switch module. | AR54.25-P-2812S | |
| 8 | Remove speakers in instrument panel. | Model 223 with code Z07 (B7 armoring on special protection version) |
AR82.62-P-7833SG |
| Model 223 except code Z07 (B7 armoring on special protection version) |
AR82.62-P-7833S | ||
| 9 | Remove center air vent. | AR83.10-P-4509S | |
| 10 | Unclip driver's side fuse and relay module, disconnect electrical connectors, and place driver's side fuse and relay module to one side with positive lines connected. | AR54.15-P-0003S | |
| 11 | Remove electric parking brake switch. | AR42.20-P-0505S | |
| 12 | Unclip left cockpit light-emitting diode strip (E34/1), disconnect electrical connector, and remove left cockpit light-emitting diode strip (E34/1). | Model 223 with code 878 (CONNECTED LIGHT ambient lighting) |
|
| Fig 1 | |||
| 13 | Unclip and remove cover (9). | Model 223 with code Z07 (B7 armoring on special protection version) |
|
| Fig 1 | |||
| 14 | Remove screw (10). | Model 223 with code Z07 (B7 armoring on special protection version) |
|
| *BA68.10-P-1001-01E | |||
| 15 | Remove damping (1). | ||
| 16 | Release and disconnect electrical connectors (2) on front passenger airbag. | Model 223 except code 460 (Canada version) except code 494 (US version) except code 498 (Japanese version) except code 835 (South Korea version) Only one electrical connector (2) is present. |
|
| Fig 2 | |||
| 17 | Remove screw (3). | *BA91.60-P-1002-01I | |
| 18 | Remove screw (11) and loosen check strap from crossmember. | Model 223 with code Z07 (B7 armoring on special protection version) |
|
| 19 | Remove screws (4). | *BA68.10-P-1001-01E | |
| 20 | Remove screws (5). | ||
| 21 | Unclip hose line (6) on instrument panel lower section (7) and place to one side. | Model 223 with code P53 (Air cleaning package) |
|
| 22 | Lift instrument panel upper section (8) slightly and remove instrument panel lower section (7). | ||
| 23 | Carefully remove instrument panel upper section (8) from vehicle and expose electrical wiring harnesses and guide out while doing so. | ||
| 24 | Install in the reverse order. |
INSTRUMENT PANEL
| Number | Designation | Model 223 | |
|---|---|---|---|
| BA68.10-P-1001-01E | Screw, instrument panel to crossmember | Nm | 4 |
AIRBAG
| Number | Designation | Model 223 | |
|---|---|---|---|
| BA91.60-P-1002-01I | Screw/bolt, front passenger airbag unit to crossmember | Nm | 6 |