Remove/Install Pyrofuse - AR54.10-P-1180S
Model 223
with code B01 (48V technology)
Model 223
with code ME10 (Hybrid vehicle (plug-in, PHEV))
| Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical component parts to temperatures above 100°C or 212°F. Disconnect current supply when working on such component parts. | AS91.00-Z-0008-01A | |
| Notice | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Remove/install | |||
| 1 | Remove front passenger seat. | AR91.10-P-1000S | |
| 2 | Remove front passenger side floor covering (1). | AR68.80-P-0008S | |
| 3 | Unclip pyrofuse (F63) from cable duct (3). | ||
| 4 | Disconnect electrical connectors (2) at pyrofuse (F63). | ||
| 5 | Remove pyrofuse (F63). | ||
| 6 | Install in the reverse order. |